ISA ADN8 is an optional eight-channel A-D card that provides high-quality analogue-to-digital conversion for the Focusrite ISA 428 MkII and ISA 828 MkII microphone preamps. Featuring Dante, AES3 and ADAT connectivity, the card operates at sample rates up to 24-bit / 192kHz.
EIGHT-CHANNEL A-D CARD FOR ISA 428 MKII AND ISA 828 MKII, INCLUDING DANTE CONNECTIVITY
ISA ADN8 is an optional eight-channel A-D card that provides high-quality analogue-to-digital conversion for the Focusrite ISA 428 MkII and ISA 828 MkII microphone preamps. Featuring Dante, AES3 and ADAT connectivity, the card operates at sample rates up to 24-bit / 192kHz.
The card offers primary and secondary RJ45 Dante output ports, an AES59 DB25 connector for AES3 output, and a pair of TOSLINK connectors for ADAT output. Word Clock I/O on BNC connectors allows synchronisation to multiple digital sources. This also includes syncing the Dante network to house clock, or for syncing external equipment to the Dante network.
Dante outputs on the ISA ADN8 provide ISA 428 MkII and ISA 828 MkII with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller.
And as with all Focusrite Pro products, wherever you happen to be in the world, you can rely on a three-year warranty if any Focusrite Pro hardware needs repairing or replacing due to a manufacturing fault.
Features
Eight-channel analogue to digital interface for ISA 428 MkII and ISA 828 MkII
Up to 24-bit/192kHz sample rate
Dante connectivity via Primary and Secondary Ethernet ports for redundancy and auto switchover in case of failure
Eight-channel AES59 DB25 output connection for AES3
Two TOSLINK connectors for ADAT (8 channels at up to 96kHz; 4 channels at 192kHz)
Word Clock I/O on BNC connectors allows synchronisation to multiple digital sources, for syncing the Dante network to house clock, or for syncing external equipment to the Dante network
RedNet Control and Dante Controller software allow Dante routing and control from a computer; no hardware patching required
Brainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.
SPECIFICATIONS
AUDIO PERFORMANCE
0 DBFS Reference Levels: 22dBu
Frequency Response: -105dB (0.0006%) unweighted, 20Hz - 20kHz; -1dBFS input
THD+N: -121dBu 'A'-Weighted (typical)
Noise In Presence Of Signal: 121dB 'A'-weighted (typical), 20Hz - 20kHz
Word Clock Input: 1 x BNC 75O port (Switchable Termination)
Word Clock Output: 1 x BNC 75O port
DIMENSIONS
Height: 33.2mm / 1.31"
Width: 158.5mm / 6.24"
Depth: 202.4mm / 7.97"
WEIGHT
Weight: 0.59kg / 1.3lbs
ISA 428/828 A/D Card
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent
ISA ADN8 is an optional eight-channel A-D card that provides high-quality analogue-to-digital conversion for the Focusrite ISA 428 MkII and ISA 828 MkII microphone preamps. Featuring Dante, AES3 and ADAT connectivity, the card operates at sample rates up to 24-bit / 192kHz.