Sennheiser XSW-D LAVALIER SET Wireless Microphone System

No obstacles, no distractions, just effortless audio, every time. Power up the lavalier and instantly link to the XLR receiver to start recording.

One-touch ease-of-use wireless audio set that utilizes a digital transmission to seamlessly link audio sources. Equipped with an ME2-II lavalier microphone, this elegant solution makes wireless presentations easier than ever before while maintaining a reliable connection.

Lose the cables, keep the connection

Essentially a cable replacement, XS Wireless Digital uses a 2.4 GHz transmission to create a wireless peer-to-peer connection. Simply plug the included ME 2-ii lavalier into the transmitter and plug the receiver into your mixer or active PA speaker. As soon as you see the green light, you’re good to go. For presenters and public speakers alike, there is no easier way to captivate your audience while having the ability to roam free.

As easy as it gets

Each XS Wireless Digital transmitter and receiver have only one button. Press to power up and link simultaneously, click once to mute, and hold to power down. What’s more, they each feature a single LED that indicates when your connection is secure or when it’s time to charge the battery. There are no menus to fuss with or settings to worry about. It’s almost as easy as plugging in a cable, minus the cable part.

Digital for worldwide operation

XS Wireless Digital uses the same 2.4 GHz frequency as WiFi allowing for license free operation worldwide. There is no need to scan for available frequencies as the system automatically does it for you. This means you can take XSW-D with you wherever you go without fear of static interference or dropouts. Just turn it on and start your presentation.

Features

• One touch ease-of-use
• 2.4 GHz digital transmission for worldwide operation
• 75m range (250ft) in optimal conditions
• Up to 5 hours battery life on a single charge
• Switch between multiple transmitters linked to one receiver
• Configure any combination of transmitters and receivers
• Mute from either transmitter or receiver

Specifications

• Dimensions - XSW-D XLR FEMALE TX: approx. 102 x 24 x 28 mm, XSW-D MINI JACK TX: approx. 86 x 24 x 28 mm, XSW-D INSTRUMENT TX: approx. 122 x 24 x 28 mm, XSW-D XLR MALE RX: approx. 109 x 24 x 28 mm, XSW-D MINI JACK RX: approx. 86 x 24 x 28 mm, XSW-D INSTRUMENT RX: approx. 122 x 24 x 28 mm, XSW-D PEDALBOARD RX: approx. 130 x 82 x 51 mm
• THD, total harmonic distortion - < 0.1 % 
• Charging time - typ. 3 h 
• Audio output - max. 12 dBu 
• Operating temperature - -10 °C to +55 °C (14 °F to 131 °F) 
• Signal-to-noise ratio - ≥ 106 dB 
• Operating time - up to 5 h 
• Modulation - GFSK with TDMA 
• Battery Specification - Li-Ion 
• Capacity - 850 mAh 
• Codecs - aptX® Live 
• Frequency range - 2,400 - 2,483.5MHz 
• Max. Input voltage - typ. 5.0 V 
• Transmission power - max. 10 mW 
• Voltage - 3.7 V 
• Operating relative humidity - 95 % (non-condensing) 
• Latency - < 4 ms 
• Temperature Range - 0 °C - 60 °C (32 °F - 140 °F) 
• Audio frequency response - 3.5 mm Jack/XLR: 80 - 18,000 Hz, 6.3 mm Jack: 10 - 18,000 Hz

What's in the Box

• ME2-II clip-on lavalier mic
• XSW-D 3.5mm (1/8") transmitter
• XSW-D XLR male receiver
• Belt clip
• USB-A to USB-C charging cable